關閉
                點擊這里給我發消息
                點擊這里給我發消息
                 +86 0512-62751429
                +86 13416743702
                Welcome to YUSH Electronic Technology Co.,Ltd.
                YUSH Electronic
                  English    Chinese
                  YUSHUNLI Ultrasonic Stencil cleaning Machine
                  Detailed Product Description

                  Specifications

                  Model  YS-8160
                  Machine dimension 1300mm*850mm*2100mm(L*W*H)
                  Spraying chamber dimension 870mm(L)×152mm(W) ×870mm(H)
                  Max Stencil size  736mm*736mm*40mm(L*W*H)
                  Min Stencil size  550mm*500mm*30mm(L*W*H)
                  Clean solvent Aqueous clean solvent +DI Water 
                  Ultrasonic Power  1.8KW
                  Ulrasonic Frequency 40KHZ
                  Water pump pressure 0.2~0.3Mpa
                  Tank Volume  30L
                  Heating Power 4 KW
                  Woork temperature Room temperature~60℃
                  Fans Power 3KW
                  Voltage 380V AC/50HZ
                  Power 10KW
                  Weight 400KG

                   

                  YUSHUNLI Ultrasonic Stencil Cleaning Machine forPCB production line,Touch Ultrasonic combinate with high pressure spraying stencil clean machine

                  Cleaning Application

                  Apply to cleaning  High precision small hole stencils, remove solder paste , flux and other residue .

                  Features :
                  Patent design, Touch ultrasonic combining with spray cleaning, the stencil is no need to dip into the tank
                  The stencil moves up and down with a gap 0.5-2 mm between the ultrasonic source with the cleaning agent fl ows by
                  High pressure air knives blowing the stencil closely during the lift makes the drying time very short
                  Efficiently clean fine printing pitch and apertures with the solder paste and glue
                  The cycle time is less than 10 min for the solder paste and 15 min for remove glue
                  PLC control, two modes, simple operation with buttons, safe and reliable, easy maintenance
                  MPC technology with fi ltration system, low running cost and environment-friendly


                  Product Categories
                                          YUSHUNLI Ultrasonic Stencil cleaning Machine
                                          YUSHUNLI Ultrasonic Stencil cleaning Machine
                                          YUSHUNLI Ultrasonic Stencil cleaning Machine
                                           
                                          Detailed Product Description

                                          Specifications

                                          Model  YS-8160
                                          Machine dimension 1300mm*850mm*2100mm(L*W*H)
                                          Spraying chamber dimension 870mm(L)×152mm(W) ×870mm(H)
                                          Max Stencil size  736mm*736mm*40mm(L*W*H)
                                          Min Stencil size  550mm*500mm*30mm(L*W*H)
                                          Clean solvent Aqueous clean solvent +DI Water 
                                          Ultrasonic Power  1.8KW
                                          Ulrasonic Frequency 40KHZ
                                          Water pump pressure 0.2~0.3Mpa
                                          Tank Volume  30L
                                          Heating Power 4 KW
                                          Woork temperature Room temperature~60℃
                                          Fans Power 3KW
                                          Voltage 380V AC/50HZ
                                          Power 10KW
                                          Weight 400KG

                                           

                                          YUSHUNLI Ultrasonic Stencil Cleaning Machine forPCB production line,Touch Ultrasonic combinate with high pressure spraying stencil clean machine

                                          Cleaning Application

                                          Apply to cleaning  High precision small hole stencils, remove solder paste , flux and other residue .

                                          Features :
                                          Patent design, Touch ultrasonic combining with spray cleaning, the stencil is no need to dip into the tank
                                          The stencil moves up and down with a gap 0.5-2 mm between the ultrasonic source with the cleaning agent fl ows by
                                          High pressure air knives blowing the stencil closely during the lift makes the drying time very short
                                          Efficiently clean fine printing pitch and apertures with the solder paste and glue
                                          The cycle time is less than 10 min for the solder paste and 15 min for remove glue
                                          PLC control, two modes, simple operation with buttons, safe and reliable, easy maintenance
                                          MPC technology with fi ltration system, low running cost and environment-friendly


                                          Online Message
                                          Welcome message, we will reply within 24 hours!
                                          *Subject:
                                          *Your E-Mail:
                                          (Please make sure your E-mail address is correct.
                                          Else, the receiver cannot reply you afterwards. )

                                          Content:
                                          *Country/Region:
                                          Your Company:
                                          Your Name:
                                          Tel:
                                          Fax:
                                          Related Product
                                          YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016
                                          CONTACT US
                                          Website:http://www.travelblogfc.com
                                          Contacts:Eva Liu +86 13416743702
                                          Tel:+86-512-62751429
                                          Skype:evaliuhuan
                                          Email:sales@yushunli.com evaliu@hk-yush.com
                                          Address: Building H, GuoRui Pioneering Park,
                                          No. 1068 Jinyang East Road, Lujia Town, Kunshan,Suzhou.
                                          Postcode:215331
                                          Dongguan Factory Address: 5th Floor, No.10,
                                          Shanquan Road, Yongtou Village, Chang’an Town,
                                          Dongguan City, Guangdong province, China.
                                          Postcode:523843
                                          YUSH Electronic Technology Co.,Ltd. Pomeas Optical Technology Copyright 2016    
                                          小SAO货CAO得你舒服么